What You Need to Know About Fireplace Blower System

Harry Hubbard

Last updated Apr 12, 2022
Harry is our fireplace and accessories specialist. Trying out new things is his passion. His recommendation barely fails.

This post may contain affiliate links. You can view our affiliate disclosure here.

fireplace blower system

If you want to increase safety and decrease your fuel consumption, it may be time to consider updating your fireplace blower system.

Many people think that burning wood is a safer option than using natural gas or propane, but fires can quickly get out of hand if you don’t have the right safety precautions in place.

You may need an experienced professional to replace or update your fireplace blower system, including upgrading the flue pipe that leads into the chimney.

This article will help you understand how these systems work so you know when they are needed and why.



What is a Fireplace Blower?



A fireplace blower is a device mounted outside or inside the fireplace but outside the area of the fireplace itself.

It is utilized to circulate air throughout the room before pushing it back into the area around the fireplace. Fireplace fans circulate hot air and help in enhancing the exposure of fire.



Why is a Fireplace Blower Fan Needed?



Fireplaces are a great source of heat and ambience for any home. Unfortunately, they also produce unpleasant smoke, and they can also be harmful to the health of those insides.

A fireplace blower fan effectively combats these issues by circulating the air surrounding your fireplace and venting out any harmful gases and odours.

It does this while still keeping your fire’s comforting sound and flame. This means you don’t have to worry about opening windows or doors when using your fireplace!



How Do Blower Fans Work on a Fireplace?



A fireplace blower system can help increase the efficiency of your fireplace. This is because it moves heated air from the fireplace into the room, helping to evenly distribute heat throughout the space.

For a blower fan to work properly, it needs to be placed directly in front of the fireplace opening. Additionally, you’ll want to ensure that no obstructions are blocking its path before you plug it in.

If this isn’t done correctly, the airflow will not reach all room areas where heating is needed most.



How do You Operate the Fireplace Blower Fan?



A fireplace blower fan is an essential part of your space heater set up in the wintertime.

Blower fans are typically positioned right by the fireplace and gently push heated air from the fire into the room to provide comforting warmth.

When operating a blower system, there are a few important things to note: -The fan should be on when you want to use radiant heat.

This means that if you turn off the furnace for any reason, the fan must remain running until the thermostat turns back up again.

The same goes for turning down the temperature setting or shutting off the gas supply. If these occur while the fan is still running, it will continue blowing warm air in the direction of the thermostat.

This can cause damage to the unit as well as discomfort to occupants.



Is it Possible to Add a Fireplace Blower to an Existing Fireplace?



Most fireplaces have a ventilation system built to pull smoke from the chimney. A fireplace blower replaces the old system of opening and closing the damper.

A blower can dramatically improve air circulation within a room, provide more warmth, and make your fire look burning even when you are not using it.

When installing a fireplace blower system, you will need to use an existing wall vent for the intake.

The exhaust should be connected directly into the chimney flue or through another duct that leads outside.

If there is no other way out, then install a small window fan on the backside of the fireplace so that cold air does not enter the house.

This may also help with drafts in the winter months.

You may also like: The Best Fireplace Draft Stopper



Is it Worth the Investment?



The article is about homeowners’ investment when they want to install a fireplace blower system for their logs.

These systems are designed to keep smoke and heat away from home, making them worth it for people who don’t want to invest in air conditioning or other cooling systems.



Conclusion



A fireplace blower system can be a great addition to any home. With a fireplace blower, you can enjoy your fireplace in the summertime, when it is too hot for a fire.

The blower will help keep your home from getting so cold in the wintertime because it circulates warm air throughout the room.

You May Also Like

How to Inspect a Fireplace

How to Inspect a Fireplace

The weather begins to cool, and homes are filled with pumpkin spice and apple cider scents. Many people are preparing...